Which product should I use?
As with any construction project, selecting the proper material is critical to the performance of your radiant barrier installation. We offer several grades of material as well as perforated and non-perforated products to suit your particular needs. This page is intended to aid you in selecting the correct house insulation material.
Attic Installations:
You should only use perforated material in an attic.
Use ARMA FOIL™ if you intend to staple the RB above the attic space.
Use ARMA FOIL™ for applications that do not require hanging by staples.
Click here for more information on installing RB in an attic.Housewraps:
In most US climate zones, you should use ARMA FOIL™ when installing radiant barrier as a housewrap.
In a few select climate zones it may be best to use ARMA FOIL-VB™ when installing radiant barrier as a housewrap.
Check with your local building codes. If they call for a true vapor barrier on the exterior of the wall, you can use ARMA FOIL-VB™, otherwise you need to use ARMA FOIL™ which will allow your wall to "breathe".
Click here for more information on installing RB as a housewrap.Floor Installations:
In general, you should use ARMA FOIL™ when installing radiant floor insulation or in a crawl space.
Check with your local building codes. If they call for a true vapor barrier on the exterior side of the insulation, you can use ARMA FOIL-VB™, otherwise you need to use ARMA FOIL™ which will allow your floor to "breathe" to the outside.
Click here for more information on installing RB under a floor.Interior Vapor Barrier:
In most heating dominated climates (northern states) it is proper to install a vapor barrier on the interior side of the insulation. In this case you should use ARMA FOIL-VB™ when installing radiant barrier in a wall or ceiling on the interior side of the insulation.
Check with your local building codes to see if a vapor barrier is recommended.
Click here for more information on installing RB as a vapor barrier.Order Online Today