Spray Foam Roofing Kits | Roof Spray Foam Insulation

Handi-Foam™ Quick Cure Roof Patch/High Density is designed to repair, fill and insulate large voids or surfaces on foamed roof assemblies, as well as seal and insulate voids needing the highest density foam applied. Due to its excellent adhesion properties, roof spray foam provides an excellent insulation by creating a continuous air barrier that completes the building envelope. This helps improve indoor air quality, lowers heating and cooling costs, and drastically reduces energy consumption.

SPF Roof Patch (Roof Foam) / High Density Foam
Two-Component Spray Foam Roof Insulation / High Density Foam
Closed Cell Foam
R-6.5 per inch
Available in 60 and 340 board foot kits
Start/stop/store up to 30 days
ColorWise™ Nozzles

Description

Handi-Foam™ Quick Cure (Roof Patch) is designed for roof top applications. The higher density (3.1#) adds compressive strength to hold up to foot traffic. It is dispensed using the patented Handi-Gun™ dispensing unit for accurate and precise applications.

Handi-Foam™ provides an air seal and a high R-value insulation to finish out the building envelope. This helps improve indoor air quality, lowers heating and cooling costs and drastically reduces energy consumption. Handi-Foam Quick Cure assists in attaining ENERGY STAR™ rating and/or LEED credits.

Handi-Foam™ is designed utilizing a non-flammable blowing agent to assist in the safety of the end user. Handi-Foam™ spray foam, sealants, and adhesives contain no Formaldehyde, CFCs, HCFCs, or VOCs.

Kit Contents:

Component A
Component B
Hoses
Dispensing Gun
8 Spray Nozzles

Specifications

Available in 60 and 340 BDFT sizes
Tack Free: 30-60 sec.
Cuttable time: 2-5 min.
Type: Polyurethane
Fire Rating: ASTM E-84
Density: 3.1 lbs/ft³
Initial R-Value: 6.5 per inch
Closed Cell: Yes

Technical Information:

Safety Equipment Required:

Goggles, Gloves, Long Sleeves, Respirator

Videos:

Installation Tips

Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use Handi-Cleaner to clean out uncured foam.
Safety Considerations: The Safety Kit includes a tyvek suit with hood, respirator, goggles, and 2 pairs of gloves.
Clean Up: You can clean up uncured foam with Handi-Cleaner. Once foam is fully cured, you will have to remove it by mechanical means.
Application: Use a slow, steady, smooth motion to spray a continuous layer when applying the foam. Spray what appears to be a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.